PROAIR PA600LI

PA600LI – FOR A HEALTHY, COMFORTABLE AND ENERGY EFFICIENT HOME

The PA600LI is our flagship heat recovery ventilation unit. ProAir Systems designed and developed it to deliver superior indoor air quality. Mechanical ventilation with heat recovery (MVHR) offers the optimal solution for your home.

We install MVHR systems in new builds or retrofit them into most existing homes. ProAir works with many SEAI‑registered One Stop Shops. These partners support homeowners through the upgrade process.

The PA600LI suits medium‑sized homes. It ventilates properties between 80 m² and 210 m².

How MVHR Works

Clean, filtered air circulates through your home day and night. Most people spend over 80% of their time indoors. Half of all illnesses are either caused or made worse by poor indoor air quality. The ProAir 600LI removes stale, moist air continuously. This creates a healthier place to live.

The system captures water vapour as it is produced. As a result, you get no moisture condensation – that means no rot, damp, or mould.

Enquire

Benefits

Clean Fresh Air Continuously

Filtered fresh air moves through your home constantly. With most people indoors over 80% of the time, good air quality matters. Our HRV system removes stale, moist air, creating a healthier living space.

Energy Efficient Ventilation

The system saves you money by re‑using heat that would otherwise escape. It runs continuously at a low rate, so electricity use stays minimal.

Condensation Elimination

The unit removes water vapour at the source. That eliminates moisture condensation – the main cause of rot, damp, and mould.

Comfort

Your home stays comfortable year‑round. Balanced, draught‑free ventilation works in any weather.

Features

Features Summary

Expanded polyethylene casing to ensure high levels of insulation.
High efficiency pure polystyrene counter-flow plate exchanger.
Totally silent operation.
Low energy EC motors.
G4 high grade filters. Other levels available.
Touch Screen Control.
This Heat Recovery Ventilation unit is best located within the thermal envelope of the house. It can be placed at high level in a utility room or hot press in order to save on floor space. If this is not an option it may be placed in the attic.
Environmental Product Declaration (EPD) – ‘cradle to grave’, and Module D – listed HERE on EPD Ireland and available to DOWNLOAD HERE
Appendix Q listed (PCDB)

DATASHEET

Datasheet Summary

Heat Recovery Ventilation unit suitable for residential and small commercial up to 210m2.
Heat Exchanger: Counter-flow pure polystyrene 0.02mm plates
Fans: R3G190 Backward curved impellors, 2 of.
AHU body: Expanded polyethylene
Filters: G4 Panels on supply and extract.
Filters: G4 Panels on supply and extract.
Max Airflow: 380 m3/hr @ 100PA
SAP Appendix Q (PCDB) listed
Download datasheet summary HERE

“Installed a full MHRV system in our house we were renovating. Found them very competitively priced and very easy to deal with on technical issues. Highly recommend”

“ProAir installed a system in our house in 2008 and never had a day’s problem with it! The air is always fresh and the knock-on effect is, a healthier environment to live in”

“I contacted ProAir for advice and pricing for my self build. The customer service was brilliant and every staff member I encountered was very helpfully explaining the system and answering my queries. The staff who called to site were efficient and professional and called as per the agreed times. I have already recommended ProAir to a friend and would have no hesitation in recommending their services in the future”

“Extremely happy with our ProAir and their service in general, from my initial phone call to their site visit, installation process and after care service. I found them very easy and helpful to deal with, as well as good value. Constant fresh air and a handy display console to tell me if the system is working correctly or needs a filter change etc. Would highly recommend"

"We have HRV in our block-built house. Installed by ProAir of Galway. Very professional and thorough job, highly recommended. Cost was c. 8k, but we have two units due to the size of the house. Been in constant operation since October, no issues so far. Complexity? Turn it on and leave it. When you have a shower/bath press boost. That’s it."

"We also got ours from ProAir and are very happy with it. We were strapped for extra cash, but our geo-therm. guys recommended the MHRV as a way of making the whole system more efficient. No condensation is a great thing. Your house will be healthier overall."

"Very happy with my ProAir Ventilation System. They system settings had to be changed to due the hot weather so they talked me through step by step on how to correct. They were extremely helpful. Superb customer service."

"We were fighting with a lot of dampness and mould using electric dehumidifiers with little success. The heat recovery ventilation system removed all of the problems. No more dampness, no more mould and our windows are dry in the morning. The installation was done quickly and professionally. Huge thanks to ProAir!"

“Very professional from start to finish, easy to work with and always available and willing to answer a technical question. The unit is very quiet, even on boost mode it’s hardly audible. From my research I found it to be the most efficient on the market also, and it’s manufactured here in Ireland. For the self-builder, I found ProAir very good to work with, they were flexible with the scope of works and the price reflected this. They furnished me with detailed drawings and all the ducting needed, they installed the unit and commissioned at the end, this suited my requirements perfectly”

Irish Innovation in Indoor Air – Design • Supply • Install • Service

Information Centre