PROAIR PA100LI

PA100LI – VENTILATION FOR COMPACT UNITS

The PA 100LI has been designed to serve houses or apartments up to 40m². This space saving unit is ideal for apartments or extensions where only a small area is to be served.

Our experienced design team provides bespoke solutions for every customer. Highly skilled and nZEB qualified technicians install in compliance with the most up to date regulations and certification is received upon completion. Our Customer Care department will look after you for years to come.

Find out more about from our residential ventilation experts:

Enquire

Benefits

Clean Fresh Air Continuously

Filtered fresh air is circulated throughout your home day and night. On average most people spend over 80% of their time indoors. 50% of all illnesses are either caused by, or aggravated by poor indoor air quality. The ProAir HRV System will continuously remove stale moist air from your home creating a more suitable and healthy place to live.

Energy Efficient Ventilation

A Heat Recovery Ventilation system will save you money and reduce your energy requirements for heating by re-using the heat that is normally lost through poor construction. A Heat Recovery Ventilation system is also designed to operate continuously at a low rate to minimise the electrical energy consumption.

Condensation Elimination

All water vapour will be removed as it is produced. As a result there is no moisture condensation which causes rot, damp, condensation or mould growth.

Comfort

Comfort levels are superior in a house fitted with a Heat Recovery Ventilation system/unit. Irrespective of weather conditions, draught free balanced ventilation is provided all the time.

Features

Features Summary

This Heat Recovery Ventilation unit is best located within the thermal envelope of the house. It can be placed at high level in a utility room or hotpress in order to save on floor space. If this is not an option it may be placed in the attic.
Expanded polyethylene casing to ensure high levels of insulation.
High efficiency pure polystyrene counter-flow plate exchanger.
Low energy EC motors.
Touch Screen Controller.
Totally silent operation.
G4 high grade filters. Other levels available.

DATASHEET

Datasheet Summary

Heat Recovery Ventilation unit suitable for residential and small commercial.
Heat Exchanger: Counter-flow pure polystyrene 0.02mm plates
Fans: R3G133 Backward curved impellors, 2 of.
AHU body: Expanded polyethylene.
Filters: G4 Panels on supply and extract.
Control: 0-10v input variable speed, with timed boost over-ride.
Max Airflow: 125 m3/hr @ 100PA.
Conact sales@proair.ie for a technical datasheet

“Installed a full MHRV system in our house we were renovating. Found them very competitively priced and very easy to deal with on technical issues. Highly recommend”

M. McDonagh

“ProAir installed a system in our house in 2008 and never had a day’s problem with it! The air is always fresh and the knock-on effect is, a healthier environment to live in”

C. Cunningham

“I contacted ProAir for advice and pricing for my self build. The customer service was brilliant and every staff member I encountered was very helpfully explaining the system and answering my queries. The staff who called to site were efficient and professional and called as per the agreed times. I have already recommended ProAir to a friend and would have no hesitation in recommending their services in the future”

S. Carr

“Extremely happy with our ProAir and their service in general, from my initial phone call to their site visit, installation process and after care service. I found them very easy and helpful to deal with, as well as good value. Constant fresh air and a handy display console to tell me if the system is working correctly or needs a filter change etc. Would highly recommend"

C. NAUGHTON

"We have HRV in our block-built house. Installed by ProAir of Galway. Very professional and thorough job, highly recommended. Cost was c. 8k, but we have two units due to the size of the house. Been in constant operation since October, no issues so far. Complexity? Turn it on and leave it. When you have a shower/bath press boost. That’s it."

Ask About Money 01/08

"We also got ours from ProAir and are very happy with it. We were strapped for extra cash, but our geo-therm. guys recommended the MHRV as a way of making the whole system more efficient. No condensation is a great thing. Your house will be healthier overall."

Ask About Money 02/08

"Very happy with my ProAir Ventilation System. They system settings had to be changed to due the hot weather so they talked me through step by step on how to correct. They were extremely helpful. Superb customer service."

BMcC, Malahide, Dublin, August 2019

"We were fighting with a lot of dampness and mould using electric dehumidifiers with little success. The heat recovery ventilation system removed all of the problems. No more dampness, no more mould and our windows are dry in the morning. The installation was done quickly and professionally. Huge thanks to ProAir!"

G. Stephanovic

“Very professional from start to finish, easy to work with and always available and willing to answer a technical question. The unit is very quiet, even on boost mode it’s hardly audible. From my research I found it to be the most efficient on the market also, and it’s manufactured here in Ireland. For the self-builder, I found ProAir very good to work with, they were flexible with the scope of works and the price reflected this. They furnished me with detailed drawings and all the ducting needed, they installed the unit and commissioned at the end, this suited my requirements perfectly”

R. Gleese

View All

Irish Innovation in Indoor Air – Design • Supply • Install • Service

Information Centre

Get in Touch

Full Name*
Email Address*
Mobile Number*
County*
Message*
Where did you hear about us?*
- Google, Bing, Yahoo (or another search engine)
- Social Media
- Architect, Contractor, Engineer, BER Assessor
- Existing Customer
- Other
If Other, please enter*
What product are you interested in finding out more about?*
- MVHR (Mechanical Ventilation with Heat Recovery)
- MEV (Mechanical Extract Ventilation)
What stage of the build are you at?*
- Pre planning
- Planning applied
- Planning to hand
- Site work started
- Roof on
- Ready for Installation
File Upload
Drop files here or

Accepted file types: jpeg, jpg, gif, png, pdf, doc, docx, dwg, tiff, zip, xls, xlsx, Max. file size: 20 MB, Max. files: 10.
Newsletter Signup
- Newsletter Signup - Keep me informed about news, new products, events and marketing updates from ProAir Systems.
Captcha